welcome to the new iphone-develoeprs community. Register below to get started.

XDA Users Click Here New Users Click Here
+ Reply to Thread
Results 1 to 6 of 6

Thread: [CDMA]iPhone4 Hidden Dialer Codes

  1. #1
    Junior Member
    Join Date
    Feb 2011
    Posts
    10

    [CDMA]iPhone4 Hidden Dialer Codes

    Will update as I figure them out.

    *#5005*4357#, Send [4357 = help]
    Displays the PRL and PRI verison

    *#5005*74663#, Send [74663 = phone]
    Displays your current MDN

    *#5005*25327#, Send [Unknown]
    Just flashes the screen

    *#5005*274#, Send [Unknown]
    Displays nothing but has a dismiss button.

    *#5005*7828#, Send [Unknown]
    Just flashes the screen

    *#5005*78283#, Send [Unknown]
    Looks like debugging log.

    ##2539, Send [2539 = Akey]
    SPC Password = 0's. Allows you to enter a new Akey.

    *#5005*342444#, Send [342444 = Diag mybe]
    Displays, Enabled: Flase, Enabled During Sleep: Flase, History: 131072KB

    *#5005*3424255#, Send [3424255 = Diag All]
    Displays, Enabled: Flase, Enabled During Sleep: Flase, History: 131072KB

    *#5005*3424#, Send [3424 = Diag]
    Displays, Enabled: Flase, Enabled During Sleep: Flase, History: 131072KB

    *#5005*5667#, Send [5667 = Loop]
    Displays LoopBack Call UI Enabled=false



    Possible other codes, unable to figure out how to get them to work.
    74663*
    62255*
    62*
    22*
    7672*
    86*
    75337278#
    7533762#
    778#
    2267#
    5264#
    22#
    7672#
    86#
    2673#
    27844#
    278255#
    278#
    6244#
    62255#
    62#

  2. #2
    Junior Member
    Join Date
    Feb 2011
    Posts
    11
    Very handy. Now I just need one that allows me to edit the prl settings.

  3. #3
    Junior Member
    Join Date
    Feb 2011
    Location
    GuangZhou. GuangDong.P.R.CHINA
    Posts
    5
    Maybe "cdma workshop" can do it

  4. #4
    Junior Member
    Join Date
    Feb 2011
    Posts
    1
    i did *#5005*3424# says Enabled: Flase, Enabled During Sleep: Flase, History: 131072KB. then i did *5005*3424# and it says Enabled: True, Enabled During Sleep: Flase, History: 524288 KB. then i did *#5005*3424# again and i got Enabled: True, Enabled During Sleep: Flase, History: 524288 KB. im guessing *5005*3424# made it true, now how can we make During Sleep: True ?


    edit: i just did #5005*3424# and i got Enabled: Flase, Enabled During Sleep: Flase, History: 131072KB again so *5005*3424# make it True and #5005*3424# makes it False again.
    Last edited by Arsenist; 03-04-2011 at 07:59 PM.

  5. #5
    Junior Member
    Join Date
    Feb 2011
    Posts
    4

    PRL Hacks for VZW iPhone??

    Yes this would be great if we can gain access to these carrier debug settings and modify the prl. When I had my EVO, with the Techknowfile hack, I was able to force it to roam onto Verizon network with one of three modified prl's, which got it spiking all the way up to 2.8 MBS at times! ....Do you guys think anything similar will be possible eventually with our iPhones? I mean I keep hearing that my VZW iPhone is slow when using 3G. I usually get anywhere from 1.7-2.0 MBS when I have full bars on speed test, which is adequate for me most of the time. But Ive been hearing that the VZW iPhone may have been intentionally sabotaged to process data slower, even slower compared to other VZW smart phones,,ie incredible,,droid x,,etc. If the prl hacks were possible..we could not only tweak these settings, but could possibly get around Verizon "throttling" our data speeds when we use too much...I'll look into it myself and fool around a bit with CDMA workshop, but some others on our fine XDA community will probably have a answer to this eventually, hopefully.

  6. #6
    Junior Member
    Join Date
    Mar 2011
    Posts
    8
    What do you mean by this

    As of right now the 4.2.6 Firmware for iPhone CDMA Commcenter has been patched to bypass Carrier Signatures.
    ---------

    Legend for below
    --------------------
    (A) theiphonewiki. com/wiki/index.php?title=Phone_app_codes]Phone app codes - The iPhone Wiki

    (B) pg 24
    cryptolux. org/media/deepsec-aybbabtu.pdf

    Enable with *5005*AANS# on iPhones,
    disable with #5005*AANS#

    AANS is 2267 (Auto ANSwer)
    ---------

    Possible other codes, unable to figure out how to get them to work.
    74663* - 5005*'''PHONE'''# display/set own number (if stored on SIM). Available in GUI form from Settings/Phone. (A)
    62255* 5005*MA255# MobileAnalyzer (FullTrace?) status (disabled by default) (A)
    62* 5005*MA# MobileAnalyzer status (disabled by default)
    22* - 5005*'''CB'''# enable cell broadcast messages (A)
    7672* 5005*'''SMSC'''# SMS Center number (stored on SIM card) (A)
    86* - 5005*'''VM'''# Voicemail number (if not specified by the carrier bundle) (A)
    75337278#
    7533762#
    778#
    2267# see (B)
    5264# 5005*'''LANG'''# set language(?)(not related to the interface language)(a prompt pops up asking for an ISO 639-1 language code) (A)
    22# 5005*'''CB'''# enable cell broadcast messages (A)
    7672# 5005*'''SMSC'''# SMS Center number (stored on SIM card) (A)
    86#
    2673# 5005*CORE# CoreDump status (disabled by default) (A)
    27844#
    278255#
    278# 5005*ART# "Artemis?" (A)
    6244#
    62255# 5005*MA255# MobileAnalyzer (FullTrace?) status (disabled by default) (A)
    62# 5005*MA# MobileAnalyzer status (disabled by default)

    still have 7 things to figure out...
    Last edited by kocoman; 03-14-2011 at 08:26 AM.

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts